Fluid Art Epoxy Resin.

Fluid Art Resin, perfect for creating stunning resin paintings and sealing artwork.

With a thickness of up to 3mm, this top coat provides a crystal clear surface and enhances the vibrancy and depth of your artwork.

The simple 1:1 mixing ratio makes preparation easy, while the medium viscosity allows for smooth application and self-leveling properties.

Whether you are a professional artist or a DIY enthusiast, our Fluid Art Resin Epoxy Resin is the perfect choice for sealing and protecting your masterpieces.

Experience the beauty and durability of our resin and take your artwork to the next level.

Our UV-resistant formula protects against yellowing and light exposure and guarantees a lasting, crystal-clear appearance.

Our resin is made from non-toxic, safe and environmentally friendly ingredients and is completely odorless, non-flammable and free of VOCs and solvents - for a pleasant working environment that is safe for you and the environment.

We offer high-quality resin materials for excellent, long-lasting results.

Areas of application:

This epoxy resin is very suitable for fluid art, resin painting, topcoat, pouring over artwork and photos, bar tables & table tops, etc.
Production of jewelry from silicone molds with a casting height of 0.1 cm to 0.3 cm.
For casting or laminating.

For thicker castings or low viscosity resin castings use:

Crystal Clear Casting Resin - 0.1 to 2 cm casting height

Or:

Crystal Clear Deep Casting Resin - up to 5 cm casting height

Or:

Crystal Clear Deep Pour Resin - up to 12 cm casting height

For a higher viscosity epoxy resin use:

Crystal Clear Artwork & Topcoat Resin

Fluid Art Epoxy Resin, up to 3mm

From CHF14.80

Quantity

Mixing ratio by volume: A:B = 100:100
Color: Ultra Clear (Diamond Clear) in both components
Processing time 100 gr. at 25°C: 35 minutes*
Curing time at 25°C: 24 hours*
Fully cured after: 3 days
UV blocker: yes
Hardness: Shore D 80
Density: 1.09 g/cm³
Viscosity: 1200 cPs
Medium viscosity
Solvent-free
Completely odorless
Free of VOCs
Self-leveling
Excellent self-venting for bubble-free finish
Temperature resistant up to: 80°C
Maximum layer thickness 3mm
With a larger quantity, the processing time and the curing time are shorter!

If you have little experience, we recommend not processing the maximum amount at once.

If you still want to do this, work at 18°C with a large diameter mixing bucket and take into account a very short processing time!

Important: The higher the room temperature (>21 °C) and the larger the amount of casting, the lower the casting height should be. Epoxy resin reacts faster, especially in summer, which can lead to undesirable results.

With large quantities, such as 30 kg, overreactions can occur despite a reduced layer height. We therefore recommend pouring in two layers or using a resin system for larger layer thicknesses. Note: Temperature, pouring volume and layer height are crucial for best results.
Make sure the surface is dense and non-porous. This can cause air bubbles in the epoxy. To do this, use a thin layer of epoxy or primer.

Always use protective gloves and goggles when handling this material. Process the resin at room temperature (18 - 25 ° C) and humidity of less than 70%. To avoid deformation of the surface, the temperature must remain constant throughout the curing process. Also avoid direct sunlight through a window and avoid drafts.

Mix the A and B components in the correct ratio (A : B = 100 : 100 by volume) and mix well. Allow enough time to mix (2 - 3 minutes) and make sure to include the corners and bottom of the mixing bowl. Optionally, pour the whole thing into a second bowl and mix again. Now add all the color effects and stir again. Allow air bubbles to escape for a minute. If necessary, help by vibrating / rattling the cup. Make sure the product does not get too hot!

The epoxy resin is now ready to use. Apply the mixture with a brush/roller or pour the mixture with a thin stream into the desired mold or prepared model.

Make sure to use a large-bottomed mixing bowl for larger quantities. Avoid a thick layer in the mixing bowl as this will heat up very quickly!

Removing air bubbles is best done with an epoxy deaerator or with a flame. Please do not use flames if you have diluted the epoxy resin with alcohol or other flammable products.

If you want to apply the resin in several layers (multi-layer work):

Wet on wet:

When pouring a second layer of liquid into a first layer of epoxy liquid, you need to make sure that the exothermic reaction is completely worn off. An exothermic reaction is a reaction that releases energy. In this case, heat.
If you want to be sure, wait until the second coat is no longer tacky but you still see a fingerprint in the epoxy.

Wet on dry:

The previous layer must be sanded and made free of dust and grease.
reaction products with ammonia

Bisphenol-A-(epichlorohydrin; formaldehyde, polymer with (chloromethyl)oxirane and phenol.

Contains:

Propylidynetrimethanol, propylated, C13/C15-alkyl glycidyl ether; reaction product.

Danger:
H315 Causes skin irritation.

H317 May cause an allergic skin reaction.

H319 Causes serious eye irritation.

H302+H312 Harmful if swallowed or in contact with skin.

H318 Causes serious eye damage.

H411 Toxic to aquatic life with long lasting effects.

Danger:

P102 Keep out of the reach of children.

P270 Do not eat, drink or smoke when using this product.

P301+P310 IF SWALLOWED:Immediately call a POISON CENTER/
Doctor/call.

P280 Wear protective gloves/ protective clothing/eye protection/face protection.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing.

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.

P501 Dispose of contents/container in accordance with local/regional/national/
Dispose of in accordance with international regulations.

EUH205 Contains epoxy compounds. May produce an allergic reaction.

P271 Use only outdoors or in a well-ventilated area,

P273 Avoid release to the environment.

P280 Wear protective gloves/ protective clothing/eye protection/face protection.

P301+P330+P331 IF SWALLOWED: Rinse mouth. DO NOT induce vomiting.

P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Bemerken Sie, dass die Harz-Komponente weiss und flockig ist, handelt es sich um kristallisiertes Harz.

Bei der Kristallisation von Epoxidharz handelt es sich um einen physikalischen Vorgang, der durch externe Faktoren wie Kälte oder Temperaturschwankungen hervorgerufen wird. Es ist völlig umkehrbar und ähnelt dem Einfrieren von Wasser. Die wesentlichen Ursachen sind:

1. Zu niedrige Temperaturen: Bei Lagerung oder Transport können Kristalle bei Temperaturen unter 15 °C entstehen.

2. Temperaturschwankungen: Die Entstehung von Kristallen wird durch regelmäßige Wechsel zwischen warm und kalt vorangetrieben.
Hohe Harzreinheit: Epoxidharz mit hoher Reinheit neigt eher zur Kristallisation.
3. Niedrige Viskosität: Harze mit dünnflüssiger Flüssigkeit bilden tendenziell eher Kristalle.

Diese Reaktion tritt bei extrem tiefen Temperaturen auf und kann durch ein Wasserbad (etwa 60 Minuten/50 °C) umgekehrt werden.

Hier einfach den verschlossenen Harzbehälter ins Wasserbad legen. Danach werden sie das Harz auf die normale Raumtemperatur zurück kühlen lassen.